Industrial Maintenance and Automation Technology

UniKL MFI (Malaysia France Institute)

List of courses

Refrigerant Handling with DoE Certification

The course is designed to develop the course participants to be qualified and certified as Residential and commercial Technician, to comply with the law and to help protect the environment for the future generation.

Objectives

  • This is the course for Technician to prepare them to understand the law of environment quality, the problem of ozone depletion & global, protocol and refrigerant characteristic. The technician also will be feed up with the knowledge of refrigeration system, system contamination, safety procedures and practical activities with good services practices procedures.

Duration:
3 days

Awarding Bodies:
Department of Environmental

Target Audience:
Engineers and technicians which directly involved in HVAC industry

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Electric Vehicle Conversion

The course is designed to develop the course participants to be competent in performing Electric Vehicle Conversion.

Objectives

  • This is an entry level engineer to prepare themselves to develop understanding of electric vehicle conversion process.
    At the end of the course, the participants will be able to:
    · Develop specification for electric vehicle conversion
    · Determine the suitable electric motor
    · Determine the suitable battery specification
    · Integrate high voltage component safely

    Session presentations are interactive and use visual aids and activities to develop understanding. It is a full theory session with examples to ensure better understanding.

Duration:
4 days

Awarding Bodies:
UniKL MFI

Target Audience:
This an entry level course for engineers to prepare themselves to develop an electric vehicle conversion properly and safely.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Fundamental Algebra and Trigonometry For Engineers

This course covers general mathematical components involving algebra and trigonometry

Objectives

  • The course is to emphasizes on developing students’ competencies to prepare them for higher level Mathematics. The main method of delivery combines lecture, tutorial and drilling activities to generate participant’s interest.

Duration:
5 days

Awarding Bodies:
UniKL MFI

Target Audience:
This is an entry level course for participants to prepare themselves to improve their critical thinking.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Calculus For Engineers (Level 1) Differentiations and Integrations

This course will provide the intermediate level of engineering technology mathematics which cover differential calculus and integral calculus for different types of functions.

Objectives

  • The course is to learn the fundamental topics in calculus and other technical.

Duration:
5 days

Awarding Bodies:
UniKL MFI

Target Audience:
This is a beginner level course for participants to prepare themselves to improve their critical thinking.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Calculus For Engineers (Level 2) Applications Of Differentiations and Integrations

This course will provide the intermediate level of engineering technology mathematics which cover differential calculus and integral calculus for different types of functions.

Objectives

  • The application of differential calculus in problems solving includes solving optimization problems and related rates problems. The application of integral calculus in finding area under the curves and volumes of solids of revolution will also be included in this course.

Duration:
5 days

Awarding Bodies:
UniKL MFI

Target Audience:
This is a beginner level course for participants to prepare themselves to improve their critical thinking.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Calculus For Engineers (Level 3) Ordinary Differential Equations

This course will provide the intermediate level of engineering technology mathematics which cover differential calculus and integral calculus for different types of functions.

Objectives

  • Solving first order differential equation by using separating variables, exact product type, integrating factor and solving homogeneous or non-homogeneous second order differential equations with initial conditions will be covered.

Duration:
5 days

Awarding Bodies:
UniKL MFI

Target Audience:
This an advanced level course for participants to prepare themselves to improve their critical thinking.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Basic Statistics For Engineers

This course is aimed at providing vital concepts of engineering statistics.

Objectives

  • The students will be exposed to the theories and applications of descriptive and inferential statistics analysis.

Duration:
3 days

Awarding Bodies:
UniKL MFI

Target Audience:
This is a beginner level course for participants to prepare themselves to know the fundamental of statistics.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Introduction to Industrial Process Control Technology using Computer Aided Engineering (CAE-MATLAB/Simulink and LabVIEW)

The course is designed to provide the knowledge and competency to the participants in Industrial Process Control Technology using Computer Aided Engineering using CAE-MATLAB / Simulink and LabVIEW.

Objectives

  • To understand the concept of Industrial Process Control Technology.
  • To familiar with MATLAB/Simulink in process control system application.
  • To familiar with LabVIEW in process control system application.
  • Hands-on experience with water plant system.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Researcher in Process Control System, Engineer/Assistant Engineer involves in Process Control System, Postgraduate/undergraduate students doing research/final year project in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

LabVIEW programming (Beginner) in Water Process Automation Engineering Technology

The course is designed to provide the knowledge and competency to the participants in LabVIEW programming for beginner level in Water Process Automation Engineering Technology.

Objectives

  • To do basic graphical programming for any process automation application.
  • To familiar with the main function in LabVIEW programming.
  • Hands-on experience with water process automation plant system.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Engineer/Supervisor/Technician/Senior Technician involved in water process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water process automation any related application in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

LabVIEW programming (Intermediate) in Water Process Automation Engineering Technology

The course is designed to provide the knowledge and competency to the participants in LabVIEW programming for intermediate level in Water Process Automation Engineering Technology.

Objectives

  • To do intermediate level LabVIEW programming.
  • Hands-on experience with water process automation applications.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Engineer/Supervisor/Technician/Senior Technician involved in water process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water process automation any related application in control system.

Requirement
NIL

Structure
Theory & Practical Training

Status
Active

Related to UniKL Program
Yes

LabVIEW programming (Advance) in Water Process Automation Engineering Technology

The course is designed to provide the knowledge and competency to the participants in LabVIEW programming for advance level in Water Process Automation Engineering Technology.

Objectives

  • Do an advance level LabVIEW programming.
  • Familiar with HMI SCADA using LabVIEW programming.
  • Familiar with OPC-UA programming environment.
  • Familiar with cloud computing programming. (Node-Red & MQTT)
  • Hands-on experience with water process automation applications.

Duration:
3 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Plant Manager/System Integrator /Engineer /Supervisor /Technician/Senior Technician involved in water process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water process automation or any related application in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Water Process Automation Engineering Technology-Active Sludge Management System

The course is designed to provide the knowledge and competency to the participants in Water Process Automation Engineering Technology-Active Sludge Management System

Objectives

  • Familiarize the fundamentals of Active Sludge Management System.
  • Operate Active Sludge Management System via SCADA-Net.
  • Study the nitrification and denitrification processes.
  • Study of the oxygen concentration value influence on the biological degradation.
  • Hands-on experience with interactive learning system of Active Sludge Management System.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Plant Manager/System Integrator /Engineer /Supervisor /Technician /Senior Technician involved in water and wastewater process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water and wastewater process automation or any related application in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Water Process Automation Technology-Membrane Filtration System

The course is designed to provide the knowledge and competency to the participants in Water Process Automation Technology-Membrane Filtration System

Objectives

  • Familiarize Membrane Filtration system components
  • Study on the mode of Membrane Filtration system process.
  • Perform PID controller in Membrane Filtration system.
  • Hands-on experience with interactive learning software for Membrane Filtration System.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Plant Manager/System Integrator/Engineer/Supervisor/Technician/Senior Technician involved in water and wastewater process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water and wastewater process automation or any related application in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Water Process Automation Engineering Technology-Hydropower System Application

The course is designed to provide the knowledge and competency to the participants in Water Process Automation Engineering Technology-Hydropower System Application

Objectives

  • Familiar with Hydropower system components.
  • Study on the main function of Hydropower system.
  • Perform PID control in Hydropower system.
  • Hands on experience with Hydropower system.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Plant Manager/System Integrator /Engineer /Supervisor /Technician /Senior Technician involved in water and wastewater process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water and wastewater process automation or any related application in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Water Process Automation Engineering Technology-Water Irrigation, Hydrology and Rain Simulator

The course is designed to provide the knowledge and competency to the participants in Water Process Automation Engineering Technology-Water Irrigation, Hydrology and Rain Simulator

Objectives

  • Familiarize with Water Irrigation, Hydrology, and Rain Simulator system components.
  • Study the main function of Water Irrigation, Hydrology, and Rain Simulator system.
  • Perform PID control in Water Irrigation, Hydrology, and Rain Simulator system.
  • Hands on experience with Water Irrigation, Hydrology, and Rain Simulator system.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Plant Manager/System Integrator /Engineer /Supervisor /Technician /Senior Technician involved in water and wastewater process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water and wastewater process automation or any related application in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Water Process Automation Engineering Technology-Water Treatment Plant System

The course is designed to provide the knowledge and competency to the participants in Water Process Automation Engineering Technology-Water Treatment Plant System

Objectives

  • Familiar with Water Treatment Plant system components.
  • Study on the main function of Water Treatment Plant System.
  • Perform PID control in Water Treatment Plant System.
  • Hands on experience with Water Treatment Plant System.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Plant Manager /System Integrator /Engineer /Supervisor /Technician /Senior Technician involved in water and wastewater process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water and wastewater process automation or any related application in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Advanced Control and Monitoring in Water Process Automation Engineering Technology Application

The course is designed to provide the knowledge and competency to the participants in Advanced Control and Monitoring in Water Process Automation Engineering Technology Application

Objectives

  • Familiar with Distributed Control System in water process automation application.
  • Know the concept of Industrial Internet of Things (IIoT).
  • Perform various control strategies in water process automation application system.
  • Hands on experience with Distributed Control System water process automation application system.

Duration:
3 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Plant Manager /System Integrator /Engineer /Supervisor /Technician /Senior Technician involved in water and wastewater process automation system application and control engineering technology application, Technical Academician with good knowledge in basic programming such as C, C++, etc., Undergraduate/Postgraduate students involved in process control system final year project and research on the water and wastewater process automation or any related application in control system.

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Soil and Water Assessment Tool (SWAT) Introductory

The course is designed to provide the knowledge and competency to the participants in Soil and Water Assessment Tool (SWAT)

Objectives

  • Introduce the model overview and applications.
  • Introduction to SWAT interface (GIS)
  • Familiarize the user with the interface.

Duration:
2 days

Awarding Bodies:
Water and Energy Section-ACE UniKL MFI

Target Audience:
Participant with some knowledge of GIS, Undergraduate / postgraduate students, Researcher, R&D engineer

Requirement
NIL

Structure
Theory & Practical

Status
Active

Related to UniKL Program
Yes

Are you ready to take the next step toward your future career?